5.6" Colour LCD 4 channel receiver for 2.4 GHz
This is a 4 channel synthesized 2.4 GHz receiver with a high definition LCD screen matching the miniature 2.4 GHz colour dsp ccd camera described elsewhere in this website , It is completely portable with its own half wave dipole antenna attached by SMA connector to the rear of the receiver , the antenna can be disconnected and a high gain parabolic antenna connected by coaxial cable to improve the reception range . The receiver has its own external power supply 230v to 12v plug pack or can be powered from a cigarette lighter socket or a 12v 7A gel cell. There is an inbuilt speaker more than adequate volume and a 3.5 mm stereo socket for A/V output for recording at the usual levels eg 1.0v pk/pk into 75 ohms and a 4k7 ohm unbalanced audio output.
The received picture is clear and sharp and with excellent colour and contrast . All those who have seen this unit receiving a transmitted picture from the matching dsp ccd colour camera remark on the excellent quality of the picture.
price NZ$500 plus gst
*** BARGIN We have a complete monitoring kit comprising of a transmitting dsp ccd camera ( mentioned elsewhere in the website) with mounting hardware and 230 v AC to 9.0 v DC plug pack , 4 channel 5" LCD monitor as above with 230 v AC to 12v DC plug pack, BUT this receiver doesnt have the detachable SMA antenna for only NZ $700 plus gst
Pinfold Health Services Ltd.,1172 Arawa st,Rotorua 3201,New Zealand. ph +64-7-3488850 fax +64-7-3486555 pinfold@xtra.co.nz